How to factory reset the kwikset kevo

Craig Lloyd
How to factory reset the kwikset kevoCraig Lloyd
Writer

Craig Lloyd is a smarthome expert with nearly ten years of professional writing experience. His work has been published by iFixit, Lifehacker, Digital Trends, Slashgear, and GottaBeMobile. Read more.

How to factory reset the kwikset kevo

If you’re planning on selling your Kwikset Kevo, or just moving to another house and don’t plan to take it along with you, here’s how to factory reset it so your digital keys are completely erased from it.

Unfortunately, the process isn’t as obvious as Kwikset could have made it, since none of the buttons on the lock say “reset”, and there’s no way to reset the lock from the app. Luckily, we’re here to help (and it literally just takes 10 seconds).

Start by removing the black assembly cover by pushing it upward and sliding it out.

How to factory reset the kwikset kevo

Locate the small button labeled “A”. It will be near the top-left corner of the lock.

How to factory reset the kwikset kevo

Press and hold this button for about ten seconds until you hear the lock beep and the lights on the outside portion of the lock flash red.

How to factory reset the kwikset kevo

Once this happens, release the button and you’ll be good to go! The Kevo is now ready for its new owner. Again, this will completely erase all of your current digital keys, as well as any fobs that you have connected to it. So make sure that you reset the lock after you’re positive that you won’t use it anymore.

  • › How to Show Your Work Hours and Location in Google Calendar
  • › You Can Finally Move WhatsApp Chats From iPhone to Android
  • › How to Print Double-Sided on Windows 11
  • › Samsung Galaxy Phones Are Getting Grammarly Installed by Default
  • › How to Enable Cookies in Google Chrome

How to factory reset the kwikset kevo Craig Lloyd
Craig Lloyd is a smarthome expert with nearly ten years of professional writing experience. His work has been published by iFixit, Lifehacker, Digital Trends, Slashgear, and GottaBeMobile.
Read Full Bio »

You may reset the lock by pressing the Premis Button “A” on the back panel for 20 seconds. This method will bring the lock to factory default condition but not trigger the handing process.

A factory reset will delete all codes associated with the lock. 1. Make sure the door is open and unlocked. 2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep. 3. Press and release the program button. You will hear one short beep. 4. Test with an existing User code, the lock should not work.

For your convenience, we've created an easy to follow interactive guide on how to perform a factory reset. If you wish to reset your Kevo, press and hold down the reset button for 10 seconds until the lock beeps and the lock face LEDs flash red.Note: You will need to re-enroll your Owner phone and fobs, and you will need to resend eKeys to your Kevo users. Your eKeys never expire, so you will still be able to send them after a reset.Smart devices:After a system reset, you will need to re-enroll and calibrate your Owner phone. You will still be able to send eKeys to anyone who previously had an active eKey at the time of reset.Fobs:After a system reset, all fobs will need to be re-enrolled and calibrated.Press and release the fob’s enroll button. The fob’s LED will begin to blink green.Press and release the Program buttonHold the fob close against the back panel. The fob’s LED will begin to blink faster. When it turns solid green, the fob is successfully enrolled.Bring your fob and standard key outside with you and test to make sure that Kevo is communicating with your fob to lock and unlock. If the fob will be used frequently in your Kevo system, it is highly recommended that you perform the calibration process for added security.

This procedure will delete all User Codes associated with the lock, and the default Programming Code (0-0-0-0) and User Code (1-2-3-4) will be restored. 1. Make sure the door is open and unlocked. Press and hold the Reset button for 5 seconds, until you hear 3 long beeps. 2. Enter the default Programming Code (O-O-O-0). 3. Press enter arrow. You will hear one beep. 4. Press 0. 5. Press enter arrow. The latch bolt will extend and retract to learn the orientation of the door. If successful, you will hear 2 beeps. If unsuccessful, you will hear 3 beeps (make sure the door is open and unlocked and that you are using a fresh set of batteries). 6. Test the lock: Activate the screen. With the door open and unlocked, press the Lock symbol. Make sure it locks the door. 7. Test the default User Code: Activate the screen. Touch the random digits that appear. Enter the default User Code (1-2-3-4), then press the Lock symbol. Make sure it unlocks the door. The default Programming Code is 0-0-0-0. It is recommended that you change it to a code of your own. The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.

How to Reset the Lock1. Make sure the door is open and unlocked.2. Press PROG -(for 30 seconds). You will hear 1 long beep.3. Release PROG button4. Press PROG again.5. You will hear 3 long beepsNote: To use the lock, you will have to go through the door handing process and add User Codes.

Resetting the unit:1. Remove batteries.2. Push program 3 times.3. Push all the buttons on keypad in sequence.4. Push the lock button.

How to restore default settingsThis procedure will delete all User Codes associated with the lock, and the default Mastercode (0-0-0-0) and User Code (1-2-3-4) will be restored.1. Make sure the door is open and unlocked. Press and hold the Reset button for 5 seconds, until you hear 3 long beeps.2. Enter the default Mastercode (O-O-O-0).3. Press the lock button. You will hear one beep.4. Press 0.5. Press the lock button. The latch bolt will extend and retract to learn the orientation of the door. If successful, the keypad will flash green and you will hear 2 beeps. If unsuccessful, the keypad will flash red and you will hear 3 beeps (make sure the door is open and unlocked and that you are using a fresh set of batteries).6. Test the lock: With the door open and unlocked, Press the lock button. Make sure it locks the door.7. Test the default User Code: Enter the default User Code (1-2-3-4), then press . Make sure it unlocks the door.The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.

Factory ResetA factory reset will restore the lock to factory default settings and if the lock is paired to a smart home it will remove the lock from your smart home system. 1. Remove battery pack.2. Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.3. Press the Program button once more. When the LED flashes green and you hear two beeps, the lock has been reset.4. Perform the door handing process again to teach the lock the orientation of the door. 5. IF LOCK IS A HOMECONNECT LOCK: Perform the inclusion process again to add the lock back into your network and controller.

Factory ResetA factory reset will restore the lock to factory default settings and if the lock is paired to a smart home it will remove the lock from your smart home system. 1. Remove battery pack.2. Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.3. Press the Program button once more. When the LED flashes green and you hear two beeps, the lock has been reset.4. IF A SMART LOCK PRODUCT: Pair the lock with your smart home system5. Add user codes to your lock.

Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds). 2. Enter new Mastercode.

How do I reset my Kwikset SmartCode 910?

How to perform a factory reset:

  1. Remove the batteries.
  2. Press and hold the lock button on the keypad.
  3. Place the batteries back in (while still holding the button)
  4. The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

How do you change the code on a Kwikset lock?

Press the program button and look for the checkmark symbol.

  1. Press the checkmark symbol once.
  2. Enter new master code.
  3. Press lock symbol once.
  4. Re-enter master code.
  5. Press lock symbol once.

What is my Kwikset master code?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I reset my Kwikset auto lock?

1 Factory Reset

  1. Open your door.
  2. Extend the latch bolt.
  3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
  4. Push and hold the reset button for 10 seconds, until the lock beeps.
  5. The light ring will flash red, then spin amber.
  6. The lock has now been restored and is ready to be set up again.

How do you clear the code on a Kwikset lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

How do I reset my Kwikset smartkey lock without key?

Kwikset Smartkey – Rekey without Existing key

  1. Remove the lock from the door. In this example we will be using a Kwikset Kevo as the example Smartkey. …
  2. Remove Retainer Clip. This clip keeps the lock cylinder inside the housing. …
  3. Remove Cylinder. …
  4. Remove Retainer Clip. …
  5. Remove Plug from Housing. …
  6. Line Up Wafers. …
  7. Insert New Key and Let Tab Go.

How do you change the code on a Kwikset 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

Is there a master key for Kwikset locks?

Total Key Control

Key management is now easier! Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.

How do I change the code on my Kwikset SmartCode 910?

How to add a user code on my Smartcode touchscreen?

  1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
  2. Press Checkmark symbol once.
  3. Enter Mastercode.

How do you clear the code on a Kwikset lock 910?

How do I delete all user codes on my SmartCode?

  1. Keep door open. Press the Program button once. …
  2. Press Lock button once.
  3. Enter Mastercode.
  4. Press Lock button once.
  5. Press “9” six times.
  6. Press Lock button once.
  7. Press “9” six times.
  8. Press Lock button once. If programming is successful, the keypad will flash green once with one beep.

How do I factory reset my Kwikset?

1 Factory Reset

  1. Open your door.
  2. Extend the latch bolt.
  3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
  4. Push and hold the reset button for 10 seconds, until the lock beeps.
  5. The light ring will flash red, then spin amber.
  6. The lock has now been restored and is ready to be set up again.

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I reset my Kwikset SmartKey lock without key?

Kwikset Smartkey – Rekey without Existing key

  1. Remove the lock from the door. In this example we will be using a Kwikset Kevo as the example Smartkey. …
  2. Remove Retainer Clip. This clip keeps the lock cylinder inside the housing. …
  3. Remove Cylinder. …
  4. Remove Retainer Clip. …
  5. Remove Plug from Housing. …
  6. Line Up Wafers. …
  7. Insert New Key and Let Tab Go.

How do you clear the code on a Kwikset lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

Where is program button on Kwikset lock?

Changing the Code Step-by-Step

While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad.

How do you reprogram a SmartCode door lock?

How to restore default settings on my SmartCode 955? Perform a factory reset

  1. Make sure the door is open and unlocked.
  2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
  3. Press and release the program button. You will hear one short beep.

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

How do I factory reset my Kwikset 913?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock.

Why is my Kwikset lock not working?

Take the battery pack out of the unit and depress the button labeled “Program” three times if the unit doesn’t operate properly after installation or fails to open with a key. Allow ten seconds to elapse, then hold down the “Lock” button while reinstalling the battery pack.

How do I reset my Z wave door lock?

Complete the following steps to factory default your Kwikset Z-Wave Lock.

How do I change the code on my Kwikset SmartCode 910?

How to add a user code on my Smartcode touchscreen?

  1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
  2. Press Checkmark symbol once.
  3. Enter Mastercode.

How do I factory reset my Kwikset SmartCode?

How to restore default settings on my SmartCode lever? Perform a factory reset

  1. Remove battery pack.
  2. Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
  3. Press the Program button once more.

How do I factory reset my Kwikset 909?

How to restore default settings on my Signature Series or SmartCode Deadbolt? Perform a factory reset

  1. Remove battery pack.
  2. Press and HOLD the Program button while reinserting the battery pack. …
  3. Press the Program button once more. …
  4. Perform the door handing process again to teach the lock the orientation of the door.

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I change the code on my Kwikset SmartCode 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

How do I reset my Kwikset smartkey lock without key?

Kwikset Smartkey – Rekey without Existing key

  1. Remove the lock from the door. In this example we will be using a Kwikset Kevo as the example Smartkey. …
  2. Remove Retainer Clip. This clip keeps the lock cylinder inside the housing. …
  3. Remove Cylinder. …
  4. Remove Retainer Clip. …
  5. Remove Plug from Housing. …
  6. Line Up Wafers. …
  7. Insert New Key and Let Tab Go.

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

How do I factory reset my Kwikset 913?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock.

Why is my Kwikset lock not working?

Take the battery pack out of the unit and depress the button labeled “Program” three times if the unit doesn’t operate properly after installation or fails to open with a key. Allow ten seconds to elapse, then hold down the “Lock” button while reinstalling the battery pack.

How do you remove the code on a Kwikset door lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

How do I delete the code on my Kwikset 909 lock?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset.

How do I reset my Kwikset SmartCode master code?

How do I enable/delete the mastercode on my Smartcode?

  1. Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds).
  2. Enter new Mastercode.
  3. Press Lock button once.
  4. Re-enter Mastercode.
  5. Press Lock button once. …
  6. Make sure switch #3 is on, and press the Program button once.

How do I delete all codes on Kwikset SmartCode 913?

How do I delete all user codes on my SmartCode?

  1. Keep door open. Press the Program button once. …
  2. Press Lock button once.
  3. Enter Mastercode.
  4. Press Lock button once.
  5. Press “9” six times.
  6. Press Lock button once.
  7. Press “9” six times.
  8. Press Lock button once. If programming is successful, the keypad will flash green once with one beep.

How do you reset a Kwikset lock?

1 Factory Reset

  1. Open your door.
  2. Extend the latch bolt.
  3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
  4. Push and hold the reset button for 10 seconds, until the lock beeps.
  5. The light ring will flash red, then spin amber.
  6. The lock has now been restored and is ready to be set up again.

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I reset my Kwikset SmartKey lock without key?

Kwikset Smartkey – Rekey without Existing key

  1. Remove the lock from the door. In this example we will be using a Kwikset Kevo as the example Smartkey. …
  2. Remove Retainer Clip. This clip keeps the lock cylinder inside the housing. …
  3. Remove Cylinder. …
  4. Remove Retainer Clip. …
  5. Remove Plug from Housing. …
  6. Line Up Wafers. …
  7. Insert New Key and Let Tab Go.

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

Kevo Plus should work by default through most residential firewalls. Depending on your network’s firewall and security policy, however, you may be required to open the following ports:TCP 8301 (8301-8303, 15301, 15302 as alternatives if cannot connect)TCP 443 (SSL)

Kevo Plus runs in our own secure cloud so you can access your Kevo Smart Lock from anywhere.

Yes. Kevo Plus enables remote access with the Kevo Plus gateway. The Kevo Plus gateway and service is available as an addtional purchase.However Kevo features inhome locking/unlocking. This feature allows you to lock and unlock Kevo from your app while you are in bluetooth range.

Connect the Kevo Plus hub to your router using an Ethernet cablePlug the power adapter to a power outletUsing the Kevo App, follow the instructions under “Pair a Device” to enable the Kevo Plus hubConfirm connection between Kevo Plus hub and lock by using the Kevo App, selecting the “globe” icon as indicated by the red arrow, and successfully performing locking/unlocking of the door.Iphone Kevo Plus

Remote access is automatically enabled when you set up the Kevo Plus Gateway, as long as the network you are using has an Internet connection. With remote access enabled, you can control your Kevo Smart Lock from anywhere your iOS or Android device has an Internet connection. This includes other Wi-Fi networks or your mobile connection. When the Kevo App is launched outside your home, the App contacts the Kevo cloud, where it redirects the phone's request to the appropriate Kevo lock, and then you can see and control your Kevo Smart Lock.

When you first connect the Kevo Plus Gateway to your Internet router your mobile device will make a direct connection to the Kevo Plus Gateway. After this initial connection, all communication between your mobile device and the Kevo Plus Gateway pass through our cloud services to maintain a connection wherever you are.

The Kevo Plus Gateway uses an Ethernet connection to connect to your home wireless router and then uses your high speed internet service to communicate with our cloud.

One (1) Kevo Plus can connect with a maximum ten(10) Kevo smart locks. Only one (1) Kevo account can be associated per Kevo Plus.

Unfortunately, we do not carry any power adapter separately. However, you can purchase a universal adapter. However, you need to make sure that the power specifications printed on the back of Kevo Smart Lock enabled Gateway device matches with the universal adapter that you intend to use for replacement.

– Make sure the door is open and unlocked.
– Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
– Press and release the program button. You will hear one short beep.

– Remove battery pack.
– Press and HOLD the Program button while reinserting the battery pack. …
– Press the Program button once more. …
– Perform the door handing process again to teach the lock the orientation of the door.

Beside this, How do I change the master code on a Kwikset lock?

– Make sure the lock is unlocked and the door is open.
– Enter your Mastercode – for new install, default is 0-0-0-0.
– Press the lock button. You will hear one beep.
– Press 7.
– Press the lock button. …
– Enter a new Mastercode. …
– Press the lock button.

Likewise, How do I factory reset my Kwikset Smart Lock?

– Open your door.
– Extend the latch bolt.
– Slide up the cover to open the back of your lock, exposing the buttons beneath.
– Push and hold the reset button for 10 seconds, until the lock beeps.
– The light ring will flash red, then spin amber.
– The lock has now been restored and is ready to be set up again.

Also, How do I delete all codes on Kwikset SmartCode 909?

– Keep door open. Press the Program button once. …
– Press Lock button once.
– Enter Mastercode.
– Press Lock button once.
– Press “9” six times.
– Press Lock button once.
– Press “9” six times.
– Press Lock button once. If programming is successful, the keypad will flash green once with one beep.

How do I factory reset my Kwikset SmartCode 909?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door, and add user codes to your lock.

22 Related Question Answers Found

How do I factory reset my Kwikset 910?

– Remove the batteries.
– Press and hold the lock button on the keypad.
– Place the batteries back in (while still holding the button)
– The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

How do I reset my Kwikset lock code?

– Insert functioning key & turn 1/4 turn clockwise.
– Insert & remove the SmartKey learn tool. Remove functioning key.
– Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do I delete all codes on Kwikset?

– Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
– Press Checkmark symbol once.
– Press Lock symbol once.
– Enter Mastercode.
– Press Lock symbol once.
– Enter user code to be deleted.
– Press Lock symbol once.
– Re-enter user code to be deleted.

How do I factory reset my Kwikset?

– Open your door.
– Extend the latch bolt.
– Slide up the cover to open the back of your lock, exposing the buttons beneath.
– Push and hold the reset button for 10 seconds, until the lock beeps.
– The light ring will flash red, then spin amber.
– The lock has now been restored and is ready to be set up again.

How do I reset my Kwikset keyless entry?

– Insert functioning key & turn 1/4 turn clockwise.
– Insert & remove the SmartKey learn tool. Remove functioning key.
– Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do you rekey a lock without the original key?

In most cases, a locksmith can rekey your locks even if you’ve lost or misplaced the original key. He/she can either shim or pick the lock in order to unlock the door. When rekeying a lock cylinder, the locksmith will have an easier time removing the lock cylinder after bringing the lock to the “unlock” position.

Where is the program button on Kwikset lock?

Do this carefully to avoid damaging the lock assembly. While the door is open, press the “Program” keypad button located on the interior side of the door.

How do you delete codes on Kwikset?

– Make sure the door is open.
– If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
– Press 2 to delete a user code. …
– Press Kwikset.
– Enter the user code you wish to delete. …
– Enter the user code again.
– Press Kwikset.

How do you change the master code on a Kwikset lock?

– Make sure the lock is unlocked and the door is open.
– Enter your Mastercode – for new install, default is 0-0-0-0.
– Press the lock button. You will hear one beep.
– Press 7.
– Press the lock button. …
– Enter a new Mastercode. …
– Press the lock button.

How do you change the code on a digital door lock?

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I delete the master code on my Kwikset lock?

– Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
– Press Checkmark symbol once.
– Press Lock symbol once.
– Enter Mastercode.
– Press Lock symbol once.
– Enter user code to be deleted.
– Press Lock symbol once.
– Re-enter user code to be deleted.

Last Updated: 3 days ago – Co-authors : 12 – Users : 10

How to factory reset the kwikset kevo

Jei planuojate parduoti savo "Kwikset Kevo" arba tiesiog pereiti į kitą namą ir neketinate jį kartu su savimi, norėdami jį automatiškai iš naujo nustatyti, jūsų skaitmeniniai raktiniai žodžiai bus visiškai ištrinti.

Deja, šis procesas nėra toks akivaizdus, ​​kaip Kwikset galėjo tai padaryti, nes nė vienas iš užrakto mygtukų nepateikia "reset" ir nėra galimybės iš naujo nustatyti užraktą iš programos. Laimei, mes esame čia, kad padėtume (ir tai tiesiog užtruks tik 10 sekundžių).

Pradėkite nuo juodo surinkimo dangtelio nušlifavimo, stumdami jį aukštyn ir išstumdami.

How to factory reset the kwikset kevo

Suraskite mažą mygtuką, pažymėtą "A". Tai bus šalia viršutinio kairiojo spyna esančio kampo.

How to factory reset the kwikset kevo

Paspauskite ir palaikykite nuspaudę šį mygtuką maždaug dešimt sekundžių, kol išgirsite spynos pyptelėjimą ir žiburiai užrakto lauke bus raudoni.

How to factory reset the kwikset kevo

Kai tai atsitiks, atleiskite mygtuką ir būsite gerai eiti! "Kevo" dabar yra pasirengusi naujam savininkui. Vėlgi, tai visiškai ištrins visus jūsų dabartinius skaitmeninius raktus, taip pat visus su juo prijungtus fobus. Taigi įsitikinkite, kad iš naujo nustatote užraktą, kai tikitės, kad nebesinaudosite.

How to factory reset the kwikset kevo

Hvis du planlægger at sælge din Kwikset Kevo, eller bare flytter til et andet hus og ikke har planer om at tage det sammen med dig, så er det sådan for at fabriksindstille det, så dine digitale nøgler er helt slettet fra det.

RELATERET: Sådan genindtastes din Kwikset SmartKey Lock til din tidligere nøgle

Processen er desværre ikke så åbenlyst som Kwikset kunne har gjort det, da ingen af ​​knapperne på låsen siger “reset”, og der er ingen måde at nulstille låsen fra appen. Heldigvis er vi her for at hjælpe (og det tager bogstaveligt talt bare 10 sekunder).

Start med at fjerne det sorte monteringsdæksel ved at skubbe det opad og glide det ud.

How to factory reset the kwikset kevo

Find den lille knap mærket “A”. Det vil være nær det øverste venstre hjørne af låsen.

How to factory reset the kwikset kevo

Tryk på denne knap og hold den nede i ca. ti sekunder, indtil du hører låsen, og lysene på den udvendige del af låsen blinker rødt.

How to factory reset the kwikset kevo

Når dette sker , slip knappen og du vil være god at gå! Kevo er nu klar til sin nye ejer. Igen vil dette helt slette alle dine nuværende digitale nøgler, samt eventuelle fobs, du har tilsluttet det. Så sørg for at nulstille låsen, når du er positiv, at du ikke længere bruger den.

How to factory reset the kwikset kevo

Hvis du har 1. eller 2. generation Hue pærer, så er du måske bekendt med hvordan dårligt producerer de en ægte grøn farve – det er mere som et modbydeligt gul-ish grønt, men det her er en god ting er under Halloween. Ved at skifte lys til en kedelig gul-grøn grønt, kan du lave dit hus ligner en scene lige ud af en saw film.

How to factory reset the kwikset kevo

Har du nogensinde ønsket, at du kunne leve i en Jetsons-lignende fremtid, hvor robotter bringer dig øl, og du kan flyve en bil til arbejde? Nå, det meste vil nok ikke være rigtigt når som helst snart, men CES kan lide at lade som om det vil. Vi ramte showgulvet i år, så vi kunne adskille fakta fra fiktion lige til dig.