How to setup your verizon fios router with opendns or google dns

I have actually checked out that Verizon is gradually (really gradually) presenting IPV6 on its FiOS network.

I chose to attempt to see if I can draw an IPV6 address through DHCP, however it ends up I ahve definitely no concept what setups to usage.

They are supposedly utilizing DHCPv6-FD, however no such alternative exists in the user interface web page for my WAN user interface.

I can establish DHCP6, however every little thing else I am vague concerning. No concept how big of an prefix delegation dimension to collection, or if I must establish the “Demand a IPv6 prefix/information with the IPv4 connection web link” alternative.

Now, it is not drawing an IPV6 address, however I do not recognize if that is since it’s not in my location yet, or if it is since I have actually points set up

Can any person that has it functioning chime in as well as share what setups helped you?

Verizon is checking IPv6 on its FiOS network in Waltham MA, Ashburn VA, as well as in a number of locations along I-95 in Virginia (verifications have actually been seen in Dale City, Spotsylvania, as well as Richmond/Midlothian since the moment I’m publishing this). The application is by Headquarters or Cable Facility, so although I’m mins far from Ashburn, I’m offered by a various carbon monoxide, so I do not have it readily available.

My understanding is that Verizon has actually recognized some problems in their facilities that is waiting on software application updates as well as application prior to any type of opportunity of additional growth of IPv6 screening or rollout is feasible.

These are my ideal hunch setups based upon details others have actually offered running various other routers (Verizon or or else). Anything not stated right here must be left uncontrolled. None that I have actually seen message concerning IPv6 on FiOS are running pfSense, so no person has actually been able to validate whether this jobs or not.

1/8/2022: The setups listed below are what I have actually been utilizing for over a year as Verizon had IPv6 screening in my location:

WAN (or whatever user interface FiOS gets on) Setups:
a. IPv6 Config Kind: DHCP6
b. Demand just an IPv6 Prefix: examined
c. Prefix Delegation Dimension: 56
d. Send out IPv6 Prefix Tip: examined
e. Do not wait on a RA: examined (no concept if this is required or not, however FiOS does not utilize PPPoE, so it looks like it must be examined)
f. Do not enable PD/Address launch: examined (optional; must keep the prefix throughout reboots as well as software application upgrades if examined, not assured that it will certainly never ever transform though)

LAN (or OPTx) Setups:
a. IPv6 Config Kind: Track User Interface
b. Track User interface: WAN (or whatever user interface FiOS gets on)
c. Prefix ID: Select something not being made use of on an additional interior user interface.

Edited 9/7/2020to include the demand just a prefix setup; Verizon does not give a WAN address
Edited 1/8/2022to include the PD/Address launch setup (suggested setup, not a demand)

I have actually checked out that Verizon is gradually (really gradually) presenting IPV6 on its FiOS network.

I chose to attempt to see if I can draw an IPV6 address through DHCP, however it ends up I ahve definitely no concept what setups to usage.

They are supposedly utilizing DHCPv6-FD, however no such alternative exists in the user interface web page for my WAN user interface.

I can establish DHCP6, however every little thing else I am vague concerning. No concept how big of an prefix delegation dimension to collection, or if I must establish the “Demand a IPv6 prefix/information with the IPv4 connection web link” alternative.

Now, it is not drawing an IPV6 address, however I do not recognize if that is since it’s not in my location yet, or if it is since I have actually points set up

Can any person that has it functioning chime in as well as share what setups helped you?

Verizon is checking IPv6 on its FiOS network in Waltham MA, Ashburn VA, as well as in a number of locations along I-95 in Virginia (verifications have actually been seen in Dale City, Spotsylvania, as well as Richmond/Midlothian since the moment I’m publishing this). The application is by Headquarters or Cable Facility, so although I’m mins far from Ashburn, I’m offered by a various carbon monoxide, so I do not have it readily available.

My understanding is that Verizon has actually recognized some problems in their facilities that is waiting on software application updates as well as application prior to any type of opportunity of additional growth of IPv6 screening or rollout is feasible.

These are my ideal hunch setups based upon details others have actually offered running various other routers (Verizon or or else). Anything not stated right here must be left uncontrolled. None that I have actually seen message concerning IPv6 on FiOS are running pfSense, so no person has actually been able to validate whether this jobs or not.

1/8/2022: The setups listed below are what I have actually been utilizing for over a year as Verizon had IPv6 screening in my location:

WAN (or whatever user interface FiOS gets on) Setups:
a. IPv6 Config Kind: DHCP6
b. Demand just an IPv6 Prefix: examined
c. Prefix Delegation Dimension: 56
d. Send out IPv6 Prefix Tip: examined
e. Do not wait on a RA: examined (no concept if this is required or not, however FiOS does not utilize PPPoE, so it looks like it must be examined)
f. Do not enable PD/Address launch: examined (optional; must keep the prefix throughout reboots as well as software application upgrades if examined, not assured that it will certainly never ever transform though)

LAN (or OPTx) Setups:
a. IPv6 Config Kind: Track User Interface
b. Track User interface: WAN (or whatever user interface FiOS gets on)
c. Prefix ID: Select something not being made use of on an additional interior user interface.

Edited 9/7/2020to include the demand just a prefix setup; Verizon does not give a WAN address
Edited 1/8/2022to include the PD/Address launch setup (suggested setup, not a demand)

Hi,
Idea I would certainly share this with every person. I was unable to gain access to my company network through my VPN since the Verizon FIOS DNS Support was returning “not discovered” for the Links of my firm’s Intranet.

The method is to configure your Verizon FIOS Router to utilize the “Opt Out of DNS Support” DNS Web servers which finish with.14 in their IP addresses. Details concerning the Actiontec MI424 WR router is right here:

( 1) Initially, indication onto your FIOS Quantum Portal Router G1100: “1921681.1/ #/ login
( 2) Following, click “Broadband Link”
( 3) Currently click “Broadband Link (Ethernet/Coax)”
( 4) Videotape both DNS Web server numbers. In my instance they were 71.2420.12 as well as 71.2520.12
( 5) Currently click Setups
( 6) Currently go into the very same 2 IP Addresses other than adjustment the.12to.14to “Pull Out of DNS Support” from Verizon FIOS as revealed listed below, and afterwards press Apply

Hope this aids!

2015- Mar-18 3: 34 pm

An additional alternative is to utilize OpenDNS or Google’s DNS web servers. They are frequently quicker than Verizon’s DNS web servers resulting an a visibly much better Net experenice. OpenDNS can be made use of for internet site filtering system, also.

2015- Mar-18 3: 44 pm

Yes, I have actually observed Google DNS to be better (8.8.4.4 or 8.8.8.8). I made use of to established my computer system to utilize those in your home as well as job, however my job will not allow me publish unless I am utilizing their DNS.

So I evaluate the very least my residence network to 8.8.8.8.

2015- Mar-18 5: 32 pm

Your job must run their very own resolvers which would certainly be much faster than anything beyond the corp network.

2015- Mar-18 5: 58 pm

Why would certainly you desire to utilize anything however your firm’s interior DNS to gain access to your firm Intranet websites? Simply interested.